Ballast treated with asphalt emulsion, Megarok and San Jose. AASTHO standards
Keywords:
Asphalt emulsion, Ballast, Materials, Pavements, QuarriesAbstract
In the research work, the results obtained at the laboratory level of the lending material (ballast) treated with asphalt emulsion from the quarries "Megarok and San José" are compared, applying the AASTHO standards. The quarries are located in the Picoazá-La Sequita parish of the Portoviejo canton. Samples from both quarries were evaluated in the laboratory and it was possible to carry out tests of natural humidity, Atterberg, granulometric, compaction, and soil bearing capacity (CBR). Based on the results obtained, they were compared by disclosing which of the quarries meets the appropriate conditions within the construction standards and techniques, in order to stabilize the material with asphalt emulsion; in addition to comparing it with the specifications of the AASTHO standards and the MTOP standard. The result was that the materials extracted from the quarries do not meet the technical specifications; but when mixed with the asphalt emulsion, the Megarok material fulfills as type A base.
Downloads
References
Arévalo, O., Cárdenas, B., Suárez, J., & Gámez, M. (2017). Environmental Training of Students of the Civil Engineering Career The Universidad Técnica De Manabí. International Research Journal Of Engineering, IT & Scientific Research (IRJEIS), 3(5), 1-11. doi:10.21744/irjeis.v3i5.527
Avelino, L., & Fabián, B. (2016). Proceso Constructivo Del Palacio Municipal Del Cantón Santa Elena (Bachelor's thesis, Universidad de Guayaquil. Facultad de Ciencias Matemáticas y Físicas. Carrera de Ingeniería Civil).
BRACHO, C. (2005). Cuaderno FIRP S366C Emulsiones asfálticas. Mérida, Venezuela: Universidad de los Andes, Facultad de Ingeniería, Escuela de Ingeniería Química.
Crespo, S. (2010). Materiales de construcción para edificación y obra civil. Editorial Club Universitario. Alicante, España.
De Calderero, R. P., Panchana, C., & Lectong, D. M. (2018). Use of Concrete Debris. IJPSE, 2(1), 1-12.
Flores Rangel, J. A. (2015). Infraestructura carretera: construcción, financiamiento y resistencia en México y América Latina. Revista Transporte y Territorio, (13).
Fonseca, A. M. (1999). Ingeniería de pavimentos para carreteras. Ciencia e Ingeniería Neogranadina, 7, 79-92.
Gabela Berrones, D. H. (2013). Plan de mantenimiento de la carpeta asfáltica de la sección del paso lateral de Ambato comprendida entre Huachi Grande y el redondel del terremoto(Bachelor's thesis, QUITO/PUCE/2013).
González Fernández, J. (2016). Estudio de alternativas para la construcción de firmes permeables.
Martínez Balarezo, P., & Navarrete Cahamorro, C. (2007). Recuperación de asfaltos nacionales envejecidos (Bachelor's thesis, SANGOLQUÍ/ESPE/2007).
Meza, M. I. Z., Veliz, E. A. R., Mendoza, C. A. V., Delgado, R. A. C., & Ormaza, G. F. (2018). Comparison of studies through laboratory tests to loan material (ballast) of San Jose and AGRE SA quarries treated with asphalt emulsion or cement. International Journal of Physical Sciences and Engineering, 2(2), 50-67.
Pérez Pérez, I., Vázquez Santana, F., Navarro Gamir, V., Medina Rodríguez, L., & Romana García, M. (2000). Propiedades mecánicas de las capas de base y subbase construidas con materiales granulares en los firmes de carreteras. In Simposio de Carreteras y Aeropuertos (6ª. 2000. La Habana). Editorial Universitaria (La Habana).
Repositorio.puce.edu.ec/bitstream/handle/22000/6030/.INGENIERIA CIVIL. (ABRIL de 2010). Obtenido de COLOCACION DE RELLENO COMPACTADO:
Rodríguez, A. P. (Ed.). (1998). Periodismo de investigación. Diputación de Pontevedra.
Rondón, H. A., & Reyes, F. (2009). Deformación permanente de materiales granulares en pavimentos flexibles: estado del conocimiento. Revista Ingenierías Universidad de Medellín, 8(14), 71-94.
Sánchez, L. K. M., Hernández, E. H. O., Fernández, L. S. Q., & Párraga, W. E. R. (2018). Determination of Physical and Mechanical Properties of Quarries Dos Bocas Mouths and Mine Copeto for High Resistance Concretes. International Research Journal of Engineering, IT and Scientific Research (IRJEIS), 4(2), 33-40.
Published
How to Cite
Issue
Section
Articles published in the International Journal of Physical Sciences and Engineering (IJPSE) are available under Creative Commons Attribution Non-Commercial No Derivatives Licence (CC BY-NC-ND 4.0). Authors retain copyright in their work and grant IJPSE right of first publication under CC BY-NC-ND 4.0. Users have the right to read, download, copy, distribute, print, search, or link to the full texts of articles in this journal, and to use them for any other lawful purpose.
Articles published in IJPSE can be copied, communicated and shared in their published form for non-commercial purposes provided full attribution is given to the author and the journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
This copyright notice applies to articles published in IJPSE volumes 4 onwards. Please read about the copyright notices for previous volumes under Journal History.