Split waste from rattan industry? Crafted product and furniture industry fiber bar
Keywords:
rattan fiber, industrial waste of rattan, NaOHAbstract
This research aims to reduce and use wastes of rattan industries, especially during the splitting stage. This stage refers to the process of making the rattan into rattan fiber strips. This Research & Development experimented with developing the previous study, using NaOH to produce the fibers. The research procedure included preparing, soaking, washing, pressing, drying, tensile, stretching, and workmanship-experimenting processes. The most effective and efficient process, with reliable rattan fiber strips for industrial purposes, was the 1kg soaking process of rattan. 1 Liter of H2O: NaOH 98%, 100gram: 72 hours of the soaking process The result was light-brown, soft, and flexible rattan fiber strips. The widths of the strips were between 20mm and 35mm. The thicknesses of the strips were between 0.5 and 1mm. The length was adjusted based on the initial length of the material, 6000mm. The tensile strength of the rattan fiber was 3.747N while the stretching strength was 6.796%. The implementation of the fibers included crafted product designs and decorative or functional furniture. The applicable craftsmanship techniques included weaving, bundling, and winding. The rattan fiber strips of the research could be the innovation base or applied research result for product design and green interior.
Downloads
References
Abdullah, Z., Fadzlina, N., Amran, M., Anuar, S., Shahir, M., & Fadzli, K. (2015). Design and Development of Weaving Aid Tool for Rattan Handicraft. Applied Mechanics and Materials, 761, 277–281. https://doi.org/10.4028/www.scientific.net/amm.761.277
Adi Wicaksono, P., & Ahmad Kadafi, C. (2020). The Improvement of Production Process Impact in Furniture Industry Toward Circular Economy. E3S Web of Conferences, 202. https://doi.org/10.1051/e3sconf/202020207052
Ajithram, A., Jappes, J. T. W., & Brintha, N. C. (2021). Investigation on utilization of water hyacinth aquatic plants towards various bio products - Survey. Materials Today: Proceedings, 45, 2040–2045. https://doi.org/10.1016/j.matpr.2020.09.498
Ali, A., Rassiah, K., & Ahmad, M. M. . M. (2021). The Effect of Stacking Sequence of Woven Bamboo on Mechanical Behavior of Fiber-Reinforced Composites. Journal of Southwest Jiaotong University, 56(2), 591–604. https://doi.org/10.35741/issn.0258-2724.56.2.48
Anwar, U., Rafidah, M. S., Hamdan, H., & How, S. (2016). Value Adding Wood Products by Wood Finishing. Timber Technology Bulletin, 66.
Belcher, B. M. (1999). The Bamboo and Rattan Sectors in Asia: an Analysis of Production-to-Consumption Systems. In Working Paper No. 22. INBAR (International Network for Bamboo and Rattan).
Budhe, S., de Barros, S., & Banea, M. D. (2019). Theoretical assessment of the elastic modulus of natural fiber-based intra-ply hybrid composites. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(6). https://doi.org/10.1007/s40430-019-1766-z
C.H., S. T. (2004). Rattan Glossary and Compedium Grossary with Emphasis on Africa. Food and Agriculture Organization of the United Nations.
Caiado, R. G. G., de Freitas Dias, R., Mattos, L. V., Quelhas, O. L. G., & Leal Filho, W. (2017). Towards sustainable development through the perspective of eco-efficiency - A systematic literature review. In Journal of Cleaner Production (Vol. 165). https://doi.org/10.1016/j.jclepro.2017.07.166
Ch’ng, P. C., Cheah, J., & Amran, A. (2021). Eco-innovation practices and sustainable business performance: The moderating effect of market turbulence in the Malaysian technology industry. Journal of Cleaner Production, 283. https://doi.org/10.1016/j.jclepro.2020.124556
Csanády, E., Kovács, Z., Magoss, E., & Ratnasingam, J. (2019). Furniture Production Processes: Theory to Practice. Optimum Design and Manufacture of Wood Products, 367–421. https://doi.org/10.1007/978-3-030-16688-5_5
Dransfield, J., & Manokaran, N. (1993). Rattans, Plant resources of Southeast Asia 6. PROSEA.
Edeerozey, A. M. M., Akil, H. M., Azhar, A. B., & Ariffin, M. I. Z. (n.d.). Chemical modification of kenaf fibers. 61, 2023–2025. https://doi.org/10.1016/j.matlet.2006.08.006
Eden, C., & Ackermann, F. (2018). Theory into practice, practice to theory: Action research in method development. European Journal of Operational Research, 271(3), 1145–1155. https://doi.org/10.1016/j.ejor.2018.05.061
Fawcett, W., & Morris, D. (1914). The Banana: Its Cultivation, Distribution and Commercial Uses. Bulletin of the American Geographical Society, 46(11), 857. https://doi.org/10.2307/200997
Ferrão, R. B. (2021). Colonial and Post-Colonial Goan Literature in Portuguese: Woven Palms. South Asian Review, 42(3), 310–312. https://doi.org/10.1080/02759527.2021.1950257
Finnveden, G., & Östlund, P. (1997). Exergies of natural resources in life-cycle assessment and other applications. Energy, 22(9), 923–931. https://doi.org/10.1016/S0360-5442(97)00022-4
Gertsakis, J., & Lewis, H. (2003). Sustainability and the Waste Management Hierarchy. EcoRecycle Victoria, March.
Gnanaharan, R. A. M. (1997). Local tools, equipment and technologies for processing bamboo and rattan: an illustrated manual. International Network for Bamboo and Rattan.
Hartono, S., & Sobari, A. (2016). The role of cluster cycle and pattern of interaction to competition strategy. Problems and Perspectives in Management, 14(2). https://doi.org/10.21511/ppm.14(2).2016.08
Hong, I. K., Yun, H. K., Jung, Y. Bin, & Lee, S. M. (2021). A Survey on the perception of companion plants for eco-friendly urban agriculture among urban residents. Journal of People, Plants, and Environment, 24(1), 17–27. https://doi.org/10.11628/ksppe.2021.24.1.17
Hong, Z., Wang, H., & Gong, Y. (2019). Green product design considering functional-product reference. International Journal of Production Economics, 210, 155–168. https://doi.org/10.1016/j.ijpe.2019.01.008
Humar, M., Vek, V., & Bučar, B. (2008). Properties of blue-stained wood. Drvna Industrija, 59(2).
Idawati, I., Mahmud, A., & Dirawan, G. D. (2016). Effectiveness of Training Model Capacity Building for Entrepreneurship Women Based Empowerment Community. International Education Studies, 9(11), 142. https://doi.org/10.5539/ies.v9n11p142
Irjayanti, M., & Azis, A. M. (2012). Barrier Factors and Potential Solutions for Indonesian SMEs. Procedia Economics and Finance, 4, 3–12. https://doi.org/10.1016/s2212-5671(12)00315-2
Jasper, J. ., & Pirngadie, M. (1912). De Inlandsche Kunstnijverheid in Nederlandsch Indie I. Het Vlechtwerk. Mouton & Co.
Khor, K. S., & Udin, Z. M. (2013). Reverse logistics in Malaysia: Investigating the effect of green product design and resource commitment. Resources, Conservation and Recycling, 81, 71–80. https://doi.org/10.1016/j.resconrec.2013.08.005
Konietzko, J., Bocken, N., & Hultink, E. J. (2020). A tool to analyze, ideate and develop circular innovation ecosystems. Sustainability (Switzerland), 12(1). https://doi.org/10.3390/SU12010417
Korhonen, J., & Seager, T. P. (2008). Beyond eco-efficiency: A resilience perspective. Business Strategy and the Environment, 17(7), 411–419. https://doi.org/10.1002/bse.635
Kumar, R., Ul Haq, M. I., Raina, A., & Anand, A. (2019). Industrial applications of natural fibre-reinforced polymer composites–challenges and opportunities. International Journal of Sustainable Engineering, 12(3), 212–220. https://doi.org/10.1080/19397038.2018.1538267
Lai, W. L., Mariatti, M., & Mohamad, J. S. (2008). The properties of woven kenaf and betel palm (Areca catechu) reinforced unsaturated polyester composites. Polymer - Plastics Technology and Engineering, 47(12), 1193–1199. https://doi.org/10.1080/03602550802392035
Mathew, A., & Bhat, K. M. (1997). Anatomical diversity of Indian rattan palms (Calamoideae) in relation to biogeography and systematics. Botanical Journal of the Linnean Society, 125(1), 71–86. https://doi.org/10.1006/bojl.1997.0106
Maurer-Spurej, E., Pfeiler, G., Maurer, N., Lindner, H., Glatter, O., & Devine, D. V. (2001). Room temperature activates human blood platelets. Laboratory Investigation, 81(4), 581–592. https://doi.org/10.1038/labinvest.3780267
Miloševic, D. (2020). Ekofeminizam I Etika. Lipar, 72, 215–225. https://doi.org/10.46793/lipar72.215m
Multazam, M., & Saniyah, E. Y. (2020). Development and Implementation of Woven Bamboo Handicraft Online Shop in Loyok Village, Lombok, Indonesia. Jurnal Techno Nusa Mandiri, 17(2), 123–130. https://doi.org/10.33480/techno.v17i2.1638
Munir, M. T., Yu, W., & Young, B. P. (2013). Eco-efficiency and control loop configuration for recycle systems. Korean Journal of Chemical Engineering, 30(5), 997–1007. https://doi.org/10.1007/s11814-013-0005-z
Myers, R. (2015). What the Indonesian rattan export ban means for domestic and international markets, forests, and the livelihoods of rattan collectors. Forest Policy and Economics, 50, 210–219. https://doi.org/10.1016/j.forpol.2014.07.009
Nasution, H., Harahap, H., Afandy, Y., & Fath, M. T. Al. (2017). The effect of cellulose nanocrystal (CNC) from rattan biomass as filler and citric acid as co-plasticizer on tensile properties of sago starch biocomposite. AIP Conference Proceedings, 1904. https://doi.org/10.1063/1.5011900
Nilashi, M., Minaei-Bidgoli, B., Alrizq, M., Alghamdi, A., Alsulami, A. A., Samad, S., & Mohd, S. (2021). An analytical approach for big social data analysis for customer decision-making in eco-friendly hotels. Expert Systems with Applications, 186. https://doi.org/10.1016/j.eswa.2021.115722
Ning, Y., Li, Y., Yang, S., & Ju, C. (2017). Exploring socio-technical features of green interior design of residential buildings: Indicators, interdependence and embeddedness. Sustainability (Switzerland), 9(1). https://doi.org/10.3390/su9010033
Ordas, J. A. D., Nonato, M. G., & Moran, C. B. (2020). Ethnobotanical Uses of Pandanaceae Species in Selected Rural Communities in the Philippines. Economic Botany, 74(4), 411–428. https://doi.org/10.1007/s12231-020-09509-w
Pratono, A. H. (2020). Cross-cultural collaboration for inclusive global value chain: a case study of rattan industry. International Journal of Emerging Markets, 15(1), 149–170. https://doi.org/10.1108/IJOEM-01-2017-0028
Qi, H., Shi, J., & Xie, Y. A. (2019). Default correlation: rating, industry ripple effect, and business cycle. Applied Economics, 51(30), 3256–3273. https://doi.org/10.1080/00036846.2019.1566689
Rachchh, N. V., Ujeniya, P. S., & Misra, R. K. (2014). Mechanical Characterisation of Rattan Fibre Polyester Composite. Procedia Materials Science, 6, 1396–1404. https://doi.org/10.1016/j.mspro.2014.07.119
Ragheb, A., El-Shimy, H., & Ragheb, G. (2016). Green Architecture: A Concept of Sustainability. Procedia - Social and Behavioral Sciences, 216, 778–787. https://doi.org/10.1016/j.sbspro.2015.12.075
Ramakrishna, S., Zhang, T. Y., Lu, W. C., Qian, Q., Low, J. S. C., Yune, J. H. R., Tan, D. Z. L., Bressan, S., Sanvito, S., & Kalidindi, S. R. (2019). Materials informatics. Journal of Intelligent Manufacturing, 30(6), 2307–2326. https://doi.org/10.1007/s10845-018-1392-0
Ratnasingam, J., Ramasamy, G., Ioras, F., & Thanasegaran, G. (2016). Potential co-generation of electrical energy from mill waste: A case study of the Malaysian furniture manufacturing industry. BioResources, 11(2), 5064–5074. https://doi.org/10.15376/biores.11.2.5064-5074
Sahoo, S. K., Mohanty, J. R., Nayak, S., & Behera, B. (2019). Chemical Treatment on Rattan Fibers: Durability, Mechanical, Thermal, and Morphological Properties. Journal of Natural Fibers. https://doi.org/10.1080/15440478.2019.1697995
Sanusi, D. (2012). Chemical and Physical Treatments of Four Rattan Species after Felling. Journal of Tropical Wood Science and Technology, 10(1). https://doi.org///doi.org/10.51850/jitkt.v10i1.130.g126
Sastry, C. B. (2001). Rattan in the twenty-first century – an overview. Unasylva, 52(1).
Siebert, S. F. (2004). Demographic effects of collecting rattan cane and their implications for sustainable harvesting. Conservation Biology, 18(2), 424–431. https://doi.org/10.1111/j.1523-1739.2004.00484.x
Steven, Mardiyati, & Suratman, R. (n.d.). Pembuatan Mikrokristalin Selulosa Rotan Manau (Calamus manan sp.), serta Karakteristiknya. 2, 89–96.
Straka, T. J., & Layton, P. A. (2010). Natural resources management: Life cycle assessment and forest certification and sustainability issues. Sustainability, 2(2), 604–623. https://doi.org/10.3390/su2020604
Subchiandi, M. A., & Suharno, R. N. (2013). The Analysis of Affecting Factors to the Export of Rattan Furniture Indonesia in the International Market. International Journal of Science and Research (IJSR), 14(6). https://doi.org/10.21275/23101603
Sumarno, Dharsono, Guntur, Purnomo, A., & Setyawan, B. (2019). Rattan Batik: Local Wisdom-based Rattan Furnitures Finishing Industry. SEWORD FRESSH 2019, January. https://doi.org/10.4108/eai.27-4-2019.2286919
Sumarno, Heriwati, S. H., & Hartomo, D. D. (2015). Efforts to Keep Forest Sustainability and Economic Improvement for the Community around Perum Perhutani through Product Design Approach. 38(0), 41–50.
Sunderland, T. C., Balinga, M. P., Asaha, S., & Malleson, R. (2008). The utilization and management of african rattans: Constraints to sustainable supply through cultivation. Forests Trees and Livelihoods, 18(4), 337–353. https://doi.org/10.1080/14728028.2008.9752642
Suriani, M. J., Zainudin, H. A., Ilyas, R. A., Petrů, M., Sapuan, S. M., Ruzaidi, C. M., & Mustapha, R. (2021). Kenaf fiber/pet yarn reinforced epoxy hybrid polymer composites: Morphological, tensile, and flammability properties. Polymers, 13(9). https://doi.org/10.3390/polym13091532
Wahab, R., Mustafa, M. T., Sidek, S., & Rasat, M. S. M. (n.d.). {RATTAN}: Propagation, Properties and Utilization. Universiti Malaysia Kelantan Publication.
Wu, Z., Li, H., Feng, Y., Luo, X., & Chen, Q. (2019). Developing a green building evaluation standard for interior decoration: A case study of China. Building and Environment, 152, 50–58. https://doi.org/10.1016/j.buildenv.2019.02.010
Yang, Y., & Jia, T. (2015). The 21st century ecological carrying capacity and footprint in Shaanxi Province. Shengtai Xuebao, 35(24), 7987–7997. https://doi.org/10.5846/stxb201407111419
Yuan, Y., Yu, X., Yang, X., Xiao, Y., Xiang, B., & Wang, Y. (2017). Bionic building energy efficiency and bionic green architecture: A review. Renewable and Sustainable Energy Reviews, 74, 771–787. https://doi.org/10.1016/j.rser.2017.03.004
Zakikhani, P., Zahari, R., Sultan, M. T. H., & Majid, D. L. (n.d.). Extraction and Preparation of Bamboo Fibre-reinforced Composites. 63, 820–828.
Zuraida, A., Maisarah, T., & Wan-Shazlin-Maisarah, W. M. Y. (2017). Mechanical, physical and thermal properties of rattan fibre-based binderless board. Journal of Tropical Forest Science, 29(4), 485–492. https://doi.org/10.26525/jtfs2017.29.4.485492
Published
How to Cite
Issue
Section
Copyright (c) 2022 International journal of health sciences
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Articles published in the International Journal of Health Sciences (IJHS) are available under Creative Commons Attribution Non-Commercial No Derivatives Licence (CC BY-NC-ND 4.0). Authors retain copyright in their work and grant IJHS right of first publication under CC BY-NC-ND 4.0. Users have the right to read, download, copy, distribute, print, search, or link to the full texts of articles in this journal, and to use them for any other lawful purpose.
Articles published in IJHS can be copied, communicated and shared in their published form for non-commercial purposes provided full attribution is given to the author and the journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
This copyright notice applies to articles published in IJHS volumes 4 onwards. Please read about the copyright notices for previous volumes under Journal History.
