Micro sensors in orthopeadic appliances: for monitoring appliance Wear-Review
Keywords:
Micro sensors compliance, orthopaedic appliances, retentionAbstract
Orthopaedic appliances are designed to transfer forces to facial skeleton as directly as possible. These appliances effectively influence bone growth and sutural changes which when given in growing age favourably alters the continuing facial growth pattern. The primary objective is to correct the skeletal imbalance; correction of the malocclusion is relatively secondary in importance. Yet the success of orthodontics mainly depends on the retention which aims to stabilize the treatment in optimal aesthetic and functional positions. The aim of the present writing is to review the usage of micro sensors in the orthopaedic appliances in order to monitor their wear and thus finds a way to stabilize treatment results.
Downloads
References
4.Nahajowski M, Lis J, Sarul M. The Use of Microsensors to Assess the Daily Wear Time of Removable Orthodontic Appliances: A Prospective Cohort Study. Sensors. 2022 Mar 22;22(7):2435.
Ackerman MB, McRae MS, Longley WH. Microsensor technology to help monitor removable appliance wear. American journal of orthodontics and dentofacial orthopedics. 2009 Apr 1;135(4):549-51.
Ackerman MB, Thornton B. Posttreatment compliance with removable maxillary retention in a teenage population: a short-term randomized clinical trial. Orthodontics (Chic.).2011;12:22–27
Armstrong CJ. A clinical evaluation of the chin cup* Preliminary report. Australian Dental Journal. 1961 Dec;6(6):338-46
Bartsch A, Witt E, Sahm G, Schneider S. Correlates of objective patient compliance with removable appliance wear. Am J Orthod Dentofacial Orthop. 1993;104:378–386.
Bos A, Kleverlaan CJ, Hoogstraten J, Prahl-Andersen B, Kuitert R. Comparing subjective and objective measures of headgear compliance. Am J Orthod Dentofacial Orthop.2007;132:801–805
Brandao M, Pinho HS, Urias D. Clinical and quantitative assessment of headgear compliance: a pilot study.Am J Orthod Dentofacial Orthop. 2006;129:239–244.
Cureton SL, Regennitter F, Orbell MG. An accurate,inexpensive headgear timer. J Clin Orthod. 1991;25:749–754.
Kawala B, Antoszewska J, Sarul M, Kozanecka A. Application of microsensors to measure real wear time of removable orthodontic appliances. Journal of Stomatology. 2013;66(3):321-30.
Kingsley NW. A letter to the Alumni Society of the Angle School of Orthodontia. Am Orthod 1908. p.125
Koretsi, V.; Zymperdikas, V.F.; Papageorgiou, S.N.; Papadopoulos, M.A. Treatment Effects of Removable Functional Appliances in Patients with Class II Malocclusion: A Systematic Review and Meta-Analysis. Eur. J. Orthod. 2015.37.418–434
Kyriacou PA, Jones DP. Compliance monitor for use withremovable orthodontic headgear appliances. Med Biol Eng Comput. 1997;35:57–60.
Lee SJ, Ahn SJ, Kim TW. Patient compliance and locus of control in orthodontic treatment: a prospective study. Am J Orthod Dentofacial Orthop. 2008;133:354–358
Moore RJ, Watts JT, Hood JA, Burritt DJ. Intra-oral temperature variation over 24 hours. Eur J Orthod. 1999;21:249–261.
Mortensen MG, Kiyak HA, Omnell L. Patient and parent understanding of informed consent in orthodontics.Am J Orthod Dentofacial Orthop. 2003;124:541–550.
Ovsenik M, Farcˇnik F, Kosˇorok T, Zupancˇicˇ S, Volk J. Mouth temperature during removable orthodontic appliance wear. Eur J Orthod. 2006;28:e245
Pratt MC, Kluemper GT, Lindstrom AF. Patient compliance with orthodontic retainers in the postretention phase.Am J Orthod Dentofacial Orthop. 2011;140:196–201.
Proffit WR, Fields HW, Sarver DL. Contemporary orthodontics. 4th ed. St Louis: C.V: Mosby; 2007.
Reitan K. Principles of retention and avoidance of post-treatment relapse. Am J Orthod 1969;55:776-90.
Reitan K. Tissue rearrangement during the retention of orthodontically rotated teeth. Angle Orthod 1959;29:105-13.
Sahm G, Bartsch A, Witt E. Micro-electronic monitoring of functional appliance wear. Eur J Orthod. 1990;12:297–301.
Sassouni V. Dentofacial orthopedics: a critical review. American journal of orthodontics. 1972 Mar 1;61(3):255-69.
Schott TC, Goz G. Applicative characteristics of new microelectronic sensors Smart Retainer(R) and TheraMon(R) for measuring wear time. J Orofac Orthop. 2010;71:339–347
Schott TC, Ludwig B, Glasl BA, Lisson JA. A microsensor for monitoring removable-appliance wear. J Clin Orthod. 2011;45:518–520
Schott TC, Ludwig B. Microelectronic wear-time documentation of removable orthodontic devices detects heterogeneous wear behavior and individualizes treatment planning. American Journal of Orthodontics and Dentofacial Orthopedics. 2014 Aug 1;146(2):155-60.
Schott TC, Schlipf C, Glasl B, Schwarzer CL, Weber J, Ludwig B. Quantification of patient compliance with Hawley retainers and removable functional appliances during the retention phase. American Journal of Orthodontics and Dentofacial Orthopedics. 2013 Oct 1;144(4):533-40.
Sergl HG, Klages U, Zentner A. Functional and social discomfort during orthodontic treatment—effects on compliance and prediction of patients’ adaptation by personality variables. Eur J Orthod. 2000;22:307–315.
Suryasa, I. W., Rodríguez-Gámez, M., & Koldoris, T. (2021). Health and treatment of diabetes mellitus. International Journal of Health Sciences, 5(1), i-v. https://doi.org/10.53730/ijhs.v5n1.2864
Tausche, E.; Luck, O.; Harzer, W. Prevalence of Malocclusions in the Early Mixed Dentition and Orthodontic Treatment Need. Eur. J. Orthod. 2004, 26, 237–244.
Tsomos G, Ludwig B, Grossen J, Pazera P, Gkantidis N. Objective assessment of patient compliance with removable orthodontic appliances: a cross-sectional cohort study. The Angle Orthodontist. 2014 Jan;84(1):56-61.
Walia PS,Munjal S, Singh S, Singh H, Renji JE. Orthopedic Appliances-A Review Article. J Adv Med Dent Scie Res 2021;9(2):69-74
Youngson CC, Barclay CW. A pilot study of intraoral temperature changes. Clin Oral Investig. 2000;4:183–189.
Published
How to Cite
Issue
Section
Copyright (c) 2022 International journal of health sciences
![Creative Commons License](http://i.creativecommons.org/l/by-nc-nd/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Articles published in the International Journal of Health Sciences (IJHS) are available under Creative Commons Attribution Non-Commercial No Derivatives Licence (CC BY-NC-ND 4.0). Authors retain copyright in their work and grant IJHS right of first publication under CC BY-NC-ND 4.0. Users have the right to read, download, copy, distribute, print, search, or link to the full texts of articles in this journal, and to use them for any other lawful purpose.
Articles published in IJHS can be copied, communicated and shared in their published form for non-commercial purposes provided full attribution is given to the author and the journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
This copyright notice applies to articles published in IJHS volumes 4 onwards. Please read about the copyright notices for previous volumes under Journal History.