Preparation and study of mechanical and thermal properties of polymeric composites of unsaturated and polyester cellulose fibers
Keywords:
unsaturated polyester resin, Cellulose fibers, Hardness strength, Compressive strength Compressive strength, Impact strength, Thermal conductivityAbstract
In this paper, polymeric composites were prepared from unsaturated polyester as a base material with cellulose in different weight ratios (1.2%, 3%, .4%, 5%) as reinforcement material. After comparing the unsaturated polyesters before and after reinforcement for the prepared composites, it was found that there is an increase in the values of mechanical properties (Impact strength ا Hardness, Compressive Strength, Tensile strength). After the unsaturated polyester reinforcement process at a temperature of 25 ℃ and then it was found that the weight ratio in which the mechanical properties (hardness, shock, tensile, compressive) increase is 2% and when treated at temperatures (8.55) ℃ it was found that the shock resistance It increases at 55 ℃ and decreases at 8 ℃, while the hardness, tensile and compressive strength decrease at (8.55) ℃.
Downloads
References
Jaafar, Heba Jumaa, “The effect of fibers on the behavior of bandages overlaid materials with a polymeric basis, Master’s thesis, Department of Applied Sciences, University of Technology, (2010),.
Ho, M.-P., Wang, H. and Lee, J.-H., Ho, C.-K., Lau, K.-T., Leng, J.S. and Hui, D. ,Critical Factors on Manufacturing Processes of Natural Fibre Composites. Composites: Part B, 43, 3549-3562, (2012).
Sathishkumar, T.P., Navaneethakrishnan, P. and Shankar, S. ,Tensile and Flexural Properties of Snake Grass Natural Fiber Reinforced Isophthallic Polyester Composites. Composites Science and Technology, 72, 1183-1190, (2012).
Yousif, B.F., Shalwan, A., Chin, C.W. and Ming, K.C.," Flexural Properties of Treated and Untreated Kenaf/Epoxy Composites", Materials and Design, 40, 378-385, (2012).
A.V.prasad, K.M.MooohanRao, A.V.Goupta, ”Tensil eandIm pactbe havioro fricestraw- polyester composite of the physical properties of composite” India Journal of fibre & textile Research, 32, 399-403,December (2007).
Al Falih, Rana Ziyad , “The effect of temperature, thickness and environmental conditions on the thermal properties of pure and doped unsaturated polyester,” Education and Science Journal, 24, 3, (2011).
Haitham, Ruaa, Abdel-Rahim, AmarM .Hussam Abbas Khammas Hussein ,” Mechanical properties of Epoxy Based Hybrid composites Reinforced By Glass fibers And sic particles” ,The Iraq Journal for Mechanical and Material Enginecring, 15, 1, (2015).
Newago.A. Tolerant, Yusuf plat, Yassin Algol, Ali Kilim. Jawed, ” Mechanical and dynamic mechanical thermal properties of ensete fibre /woven glass fibre fabric hybrid composites Received 113221,(2020).
Al-Rifai, Bilal Abed Abdel-Wahhab, Introduction to the Basics of Dyeing Processes, Damascus University, Faculty of Science, Department of Chemistry, (2015).
Al-Rawi, Roaa Essam Ibrahim, Ebtehag Zeki Sulyman, " Preparation of polymeric composites of epoxy and randomly woven glass fibers and study of their mechanical properties and some physical properties", Al-Rafidain Science Journal, 28, 3, (2019).
Bin Saiman MP, Bin Wahab MS and Wahit MU. The effect of alkali treatment on impact strength of woven kenaf reinforced unsaturated polyester composite using vacuum infusion process. Appl Mech Mater, 564,422–427, (2014).
Zahra J., ''Addition natural pigments colorants and stabilizers materials'', PH. D Engineering material, college of engineering, Babylon university, (2007).
Avinash R. Pai , Ramanand N. Jagtap," Surface Morphology & Mechanical properties of some unique Natural Fiber Reinforced Polymer Composites- A Review", J. Mater. Environ. Sci. 6 (4) 902-917, 2015.
Rajesh, K. K., Pavan, T. K., Rajashekhar, K., Ramakr- ishna," Experimental Investigations to Improve Mechanical Properties of Sisal Reinforced E-Glass Fiber",International Journal of Science and Research, 7(7),818–823, 2018.
Waad, E. S., Sulyman , E. Z.," Preparation of Polymeric Composites from Saturated Poly ester glass powder (flourscent ) and Study of it s mechanical properties " , Iraqi Journal of Labor Research and Consumer Protection , 13(1), 2020.
H. M. Kawade and N. G. Narve, “Natural Fibre Reinforced Polymer Composites: A Review”, International Journal for Scientific Research and Development, 5, 9, 445-449, (2017).
B. Neher, R. Hossain, K. Fatima, M. A. Gafur, M. A. Hussain and F. Ahmed, “Study of the Physical, Mechanical and Thermal Properties of Banana Fibre Reinforced HDPE Composites”, Materials Sciences and Applications, 11, 245-262, (2020).
Abbas A. Al-Jeebory, Ali I. Al-Mosawi, Samara A. Al-Qurashi, Difference Fibers Reinforcement percentage and its Effect on Mechanical Properties of Thermosetting Resins, Journal of Babylon University/Engineering Science/,20(5),(2012).
Al-Bakri, Huda Abd Al-Razzaq Younes, “Study of the Mechanical Lift Paradise, Impregnated Polyester Esters for a Museum with Randomly Knitted Fiber glass and the Effects of Acidic Solutions on Its Physical Properties, Al-Rafidain Science Journal,, 23 ( 1), 114-129, (2012).
Reza Arjmandi, Ilknur Yıldırım, Fiona Hatton1, Azman Hassan, Christopher Jefferies, Zurina Mohamad and Norhayani Othman, Kenaf fibers reinforced unsaturated polyester composites: A review , Journal of Engineered Fibers and Fabrics , 16, 1–22,(2021).
Yusuff I, Sarifuddin N and Ali AM. A review on kenaf fiber hybrid composites: mechanical properties, potentials, and challenges in engineering applications. Prog Rubber Plast Recycl Technol, 37,66–83,( 2021)
Khan T, Sultan MTH, Shah AUM, etal. The effects of stacking sequence on the tensile and flexural properties of kenaf/jute fibre hybrid composites. J Nat Fibers, 18, 452–463,(2021).
Ku, H.; Wang, H.; Pattarachaiyakoop, N.; Trada, M. A review on the tensile properties of natural fiber reinforced polymer composites. Compos. Part B Eng. , 42, 856–873,( 2011),.
M. R. Sanjay, G. R. Arpitha, L. Laxmana Naik , K. Gopalakrishna, B. Yogesha, Applications of Natural Fibers and Its Composites: An Overview, Natural Resources , 7(.3), 108-114, (March 2016).
Sanjay, M.R., Arpitha, G.R. and Yogesha, B., "Study on Mechanical Properties of Natural-Glass Fibre Reinforced Polymer Hybrid Composites", A Review. Materials Today, Proceedings, 2, 2959-2967, (2015).
Mohit Hemath, Sanjay Mavinkere Rangappa, Vinod Kushvaha,, Hom Nath Dhakal,,,Suchart Siengchin, "A comprehensive review on mechanical, electromagnetic radiation shielding, and thermal conductivity of fibers/inorganic fillers reinforced hybrid polymer composites", polymer Composites, 41, (10), 3940-3965 ,( October 2020).
Hakim,Abbasov,Theeffective thermal conductivity of polymer composites filled with high conductive particles and the shell structure , 43, 4,(April 2022).
Published
How to Cite
Issue
Section
Copyright (c) 2022 International journal of health sciences
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Articles published in the International Journal of Health Sciences (IJHS) are available under Creative Commons Attribution Non-Commercial No Derivatives Licence (CC BY-NC-ND 4.0). Authors retain copyright in their work and grant IJHS right of first publication under CC BY-NC-ND 4.0. Users have the right to read, download, copy, distribute, print, search, or link to the full texts of articles in this journal, and to use them for any other lawful purpose.
Articles published in IJHS can be copied, communicated and shared in their published form for non-commercial purposes provided full attribution is given to the author and the journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
This copyright notice applies to articles published in IJHS volumes 4 onwards. Please read about the copyright notices for previous volumes under Journal History.
