Design of air temperature and humidity measurement based on Arduino ATmega 328P with DHT22 sensor

I Made Satriya Wibawa; I Ketut Putra

doi:10.53730/ijpse.v6n1.3065

Authors

I Made Satriya Wibawa
satriya_wibawa@unud.ac.id
FMIPA, Physics Study Program, Universitas Udayana, Denpasar, Indonesia
I Ketut Putra FMIPA, Physics Study Program, Universitas Udayana, Denpasar, Indonesia

Keywords:

arduino, ATmega 328P, DHT22 sensor, humidity, LCD keypad shield

Abstract

The Arduino ATmega 328P-based temperature and humidity measuring instrument have been successfully designed. The ATmega 328P microcontroller functions to process data which is the output of the DHT22 sensor which receives data signals in the form of temperature and humidity. The results detected by the design of this tool are displayed on the LCD keypad shield. The calibration process for the design tool was carried out at the BMKG Sanglah Denpasar. The results of the calibration of the design tool with reference tools at BMKG show a good level of accuracy, namely 97.97% for air temperature and 99.35% for air humidity.

Downloads

Download data is not yet available.

References

Abdulrazzak, I. A., Bierk, H., & Aday, L. A. (2018). Humidity and temperature monitoring. Int. J. Eng. Technol, 7(4), 5174-5177.

Aprianah, D. (2013). Program Kendali Intensitas Cahaya Lampu Dan Pintu Via Message Service. Laporan Akhir Politeknik Negeri Sriwijaya.Juusan Teknik Elektro. Program Studi Teknik Telekomunikasi. Palembang.

Arnold, J. E., & Griffin, Z. M. (2007). The effect of additional characters on choice of referring expression: Everyone counts. Journal of memory and language, 56(4), 521-536.

BMKG. (2019). Cuaca dan Iklim – Pengertian,Unsur Pembentuk dan Alat Ukurnya.

de Souza, S., Visco, S. J., & De Jonghe, L. C. (1997). Thin-film solid oxide fuel cell with high performance at low-temperature. Solid State Ionics, 98(1-2), 57-61. https://doi.org/10.1016/S0167-2738(96)00525-5

Dhofir, A. (2014). Pengukuran Suhu Termometer, Universitas Muhammadiyah Malang, Jawa Timur.

Djuandi, F. (2011). Pengenalan arduino. E-book. www. tobuku, 24.

Ferdoush, S., & Li, X. (2014). Wireless sensor network system design using Raspberry Pi and Arduino for environmental monitoring applications. Procedia Computer Science, 34, 103-110. https://doi.org/10.1016/j.procs.2014.07.059

Gehlot, K. S., & Jain, D. (2020). Biometric finger print based voting machine using ATmega328P microcontroller. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.11.087

Giancoli, D. C. (2001). Fisika edisi kelima jilid 1. Jakarta: Erlangga.

Giler, J. J. G., & Cedeño, C. N. P. (2020). Elaboration of bovine manure biodigester for biogas transformation to electric power. International Research Journal of Management, IT and Social Sciences, 7(5), 32-37. https://doi.org/10.21744/irjmis.v7n5.967

Green, J., & Dyer, I. (2009). Measurement of humidity. Anaesthesia & Intensive Care Medicine, 10(1), 45-47. https://doi.org/10.1016/j.mpaic.2008.11.016

Handoko. (2008). Pengamatan Unsur – Unsur Cuaca di Stasiun Klimatologi Pertanian. Jurusan Geofisika dan Meteorologi FMIPA-IPB. Bogor.

Heryanto, A., & Wisnu, A. (2008). Pemrograman bahasa C untuk mikrokontroler ATMega8535. Yogyakarta: Andi Offset.

Marian, P., & Marian, T. A. (2016). Quantum Fisher information on two manifolds of two-mode Gaussian states. Physical Review A, 93(5), 052330.

Munir, Z. A., & Anselmi-Tamburini, U. (1989). Self-propagating exothermic reactions: the synthesis of high-temperature materials by combustion. Materials Science Reports, 3(7-8), 277-365. https://doi.org/10.1016/0920-2307(89)90001-7

Nasional, D. S. (1990). SNI 04-2051-1990. Baterai Kering.

Pereira, W. F., da Silva Fonseca, L., Putti, F. F., Góes, B. C., & de Paula Naves, L. (2020). Environmental monitoring in a poultry farm using an instrument developed with the internet of things concept. Computers and Electronics in Agriculture, 170, 105257. https://doi.org/10.1016/j.compag.2020.105257

Rittersma, Z. M. (2002). Recent achievements in miniaturised humidity sensors—a review of transduction techniques. Sensors and Actuators A: Physical, 96(2-3), 196-210. https://doi.org/10.1016/S0924-4247(01)00788-9

Riyanto, S. R. (2017). Rancang Bangun Alat Kontrol Suhu Dan Kelembaban Pada Fermentasi Tempe Kedelai Berbasis Mikrokontroler (Doctoral dissertation, Politeknik Negeri Sriwijaya).

Saptadi, A. H. (2014). Perbandingan Akurasi Pengukuran Suhu dan Kelembaban Antara Sensor DHT11 dan DHT22. Jurnal Infotel, 6(2), 49-56.

Sharma, D., Jain, R., Sharma, R., Shan, B. P., & Shiney, O. J. (2021). Machine learning based BPM/Pulse interval predictor of human being using ATMega328p based development board. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.07.411

Sumartini, T. S. (2017). Meningkatan Kemampuan Komunikasi Matematis Siswa Melalui Model Pembelajaran Predict Observe Explanation. Jurnal Edukasi dan Sains Matematika (JES-MAT), 3(2), 167-176.

Tai, H., Wang, S., Duan, Z., & Jiang, Y. (2020). Evolution of breath analysis based on humidity and gas sensors: Potential and challenges. Sensors and Actuators B: Chemical, 318, 128104. https://doi.org/10.1016/j.snb.2020.128104

Utama, Y. A. K. (2016). Perbandingan Kualitas Antar Sensor Suhu dengan Menggunakan Arduino Pro Mini. e-NARODROID: Jurnal Berkala Program Studi Sistem Komputer, 2(2), 145-150.

Vallejo, R. S. R., Gámez, M. R., Espinales, A. M. S., & Pérez, A. V. (2019). Effects of thermal radiation using wood stoves on population health: Casas Viejas community, Jipijapa Canton. International Research Journal of Management, IT and Social Sciences, 6(5), 1-8. https://doi.org/10.21744/irjmis.v6n5.656

Wang, L., Zhang, M., Li, Y., Xia, J., & Ma, R. (2021). Wearable multi-sensor enabled decision support system for environmental comfort evaluation of mutton sheep farming. Computers and Electronics in Agriculture, 187, 106302.https://doi.org/10.1016/j.compag.2021.106302